Everest - ESR1
∙ Top mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system and airflow guard ensure optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Cabinet Construction
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ Open spaced interior with no walls between compartments.
∙ Galvanized steel top, bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
Lighting
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
Doors
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Field reversible.
Shelving
∙ Three epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips.
Temperature Control
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.
Options
∙ Additional shelving.
∙ 3” swivel casters with locks.
∙ 3.5” – 6” height-adjustable and interchangeable legs. ∙ Left hinged door.
* Warranty: 3 Years Parts & Labor and 5 Year Compressor Warranty
Product Specification
Temperature | Refrigerator |
Finish | Stainless Steel |
Door Style | Swing Solid |
Door Count | 1 |
Cu. Ft. Capacity | 23 |
Exterior Length (in.) | 29 1/4 |
Exterior Depth (in.) | 31 5/8 |
Exterior Height (in.) | 74 1/4 |
Power (V-Hz-Ph) | 115-60-1 |
Amps | 4 |
Compressor HP | 1/4+ |
Crated Weight (lbs.) |
296 |